News

Custom Seal Sample Approval Checklist

2026-08-11


For non-standard sealing projects, the first sample is an important step before batch production. However, custom seal sample approval should not be based only on whether the sample looks similar to the original part.

Dimensions, material, installation direction, working conditions, and actual equipment fit should all be reviewed. If the sample is installed for testing, feedback from the trial should also be considered before final production.

A clear approval process helps buyers and manufacturers confirm the sealing solution and reduce unnecessary changes during mass production.

 

 

What to Check During Sample Approval?

When reviewing custom seal samples, buyers should check the key technical details against the drawing, original sample, or agreed specifications.

Dimensions and Geometry

Check the important dimensions, including inner diameter, outer diameter, height, sealing lips, grooves, and other critical features.

For precision sealing parts, even a small dimensional difference can affect installation or sealing performance. If the sample is made from an existing part, the measured dimensions should also be compared with the 

 

original sample.

Material and Material Direction

Material selection should match the application requirements. Depending on the project, materials may include PTFE, PU, NBR, FKM, EPDM, PEEK, UPE, or other engineering materials.

For some sealing structures, material direction or processing direction may also affect installation and performance. The approved sample should therefore be checked against the agreed material specification.

 

Appearance and Hardness

The sample should be inspected for visible defects, machining marks, surface condition, burrs, cracks, deformation, or other abnormalities.

If hardness is specified for the project, the hardness value and measurement direction should also be confirmed. Appearance inspection is not a replacement for dimensional and functional checking, but it remains an important part of sample approval.

 

Installation Position and Direction

Before approval, confirm where the seal will be installed and how it should be oriented.

The actual groove, shaft, bore, mating surface, and installation direction should be consistent with the application. A seal that fits the drawing but is installed incorrectly may still lead to leakage, wear, or premature failure.

 

 

Check the Actual Working Conditions

A sealing sample should be reviewed together with the equipment conditions in which it will operate.

Important information includes the sealing medium, pressure, temperature, movement type, speed, and working environment.

For example, a seal used in hydraulic equipment may face high pressure and reciprocating movement, while a seal used in rotating equipment may require different friction and wear considerations.

Providing accurate working conditions helps the manufacturer confirm whether the sample material and design are suitable for the application.

 

Installation Trial and Usage Feedback

For many sample-based custom seals, an installation trial can provide useful information that cannot be confirmed through dimensional inspection alone.

During testing, buyers can check installation difficulty, sealing condition, friction, leakage, movement stability, wear, and other application-specific performance.

If any issue is found, feedback should include clear information such as the installation position, test conditions, observed problem, and suggested modification. Photos, videos, drawings, or marked samples can also help explain the issue.

This information gives the manufacturer a clearer basis for sample modification and further custom seal prototyping.

 

What Should Be Confirmed Before Batch Production?

Once the sample has passed evaluation, the buyer and manufacturer should confirm the final production information.

This may include the approved drawing, material, dimensions, hardness, installation direction, working conditions, packaging requirements, and required quantity.

If the sample has been modified during testing, the latest approved version should be clearly identified. This helps avoid using an earlier sample or drawing as the production reference.

For custom sealing projects, clear confirmation at this stage can reduce communication errors and make the transition from sampling to batch production more efficient.

 

Custom Seal Samples From DEF Seals

DEF Seals supports both drawing-based customization and sample-based custom seals for industrial applications.

Customers can provide drawings, existing samples, dimensions, application information, or working-condition details for project evaluation. Depending on the application, the team can discuss material selection, dimensions, structure, machining requirements, and sample preparation.

For non-standard sealing projects, small-batch sampling can also be used to verify the design before larger production quantities are discussed.

A practical seal sample approval process helps both sides confirm the product before moving forward. From initial sample review to modification and production communication, clear technical information remains an important part of a successful custom seal project.

 

Suggested links:
https://en.defseals.com/news_detail_2/65.html
https://en.defseals.com/news_detail_2/64.html
https://en.defseals.com/news_detail_2/2060624736123686912.html



News