Dispensing Valve Seals For PCB Underfill Applications
2026-09-04
In PCB assembly, underfill, silver paste coating, and automotive electronics dispensing, pneumatic jetting valve seals may need to handle high-frequency motion, temperature, solvent media, needle impact, and glue compatibility. Compared with simple static seals, this type of dispensing valve seal depends more on the combination of material, sealing structure, and energizer.
Why heat and solvent resistance matter？
Underfill and silver paste coating may involve higher temperature, solvent-containing media, or strict dispensing-stability requirements. If the seal material is not suitable for temperature, it may deform, age, or change friction behavior. If chemical-media resistance is insufficient, swelling, hardening, or failure risk may increase. Selection should therefore confirm temperature range, glue or solvent composition, pressure, frequency, and valve structure together.
Material directions for pneumatic jetting valves
The dispensing valve handbook discusses filled PTFE, FKM, and PEEK as material directions for pneumatic jetting valve seals. Filled PTFE can be reviewed for low friction, wear resistance, and chemical-media resistance. FKM can be reviewed for heat, oil, and chemical-media directions. PEEK can be reviewed for strength, wear resistance, and higher-temperature requirements. The final material should be confirmed by media composition, temperature, pressure, frequency, and sealing position.
Why spring fatigue should be reviewed？
Pneumatic jetting valves may involve repeated needle impact. When high frequency and high temperature appear together, ordinary O-rings may not maintain stable elasticity in all applications. Metal spring energizers can be reviewed as an important direction. Spring material may be discussed around SUS316 or Elgiloy depending on corrosion, temperature, and fatigue requirements.
RFQ checklist
Buyers should provide pneumatic jetting valve type or structure, sealing position, drawing or sample, underfill material or silver paste information, solvent condition, temperature, pressure, motion frequency, needle impact condition, target quantity, and sample requirement. DEF Seals can discuss custom dispensing valve seal projects based on drawings, samples, material selection, and small-batch sampling.
FAQ
Q: Should high-temperature dispensing valve seals always use FKM?
A: No. FKM is one possible heat and chemical-media direction, but friction, wear, pressure, frequency, glue composition, and seal structure should also be reviewed.
Q: When should Elgiloy spring material be evaluated?
A: Elgiloy can be discussed when higher temperature, high-frequency movement, and fatigue stability are important. The exact selection should be confirmed by project.
Suggested links:
https://en.defseals.com/news_detail_2/62.html
https://en.defseals.com/news_detail_2/71.html
https://en.defseals.com/news_detail_2/80.html
News
Contact Us
Add：Dinghao Automatic Incubation Park, South China Industrial Park, Liaobu Town, Dongguan City, Guangdong Province
Zip: 523410
Fax：0769-83260340
Email：defseals@defseals.com